07 honda accord remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105742
Printed Date: May 10, 2025 at 10:47 PM

Topic: 07 honda accord remote start

Posted By: jzone
Subject: 07 honda accord remote start
Date Posted: June 27, 2008 at 4:17 PM

I am installing a Viper 5701 and I am having problems with the remote start. I have the XK05 bypass with firmware: PKT2 and I have no idea how to install this (besides the ignition (blue wire), 12v constant (red wire), and the ground (black wire).

It has the following wires that I am not sure where to hook up:

Brown - Ground when running

Green - Security light (vehicle)

Violet/White - Data IMI

Violet - Data IMI

Orange - Data IMO

This bypass looks quite complicated, does anyone suggest using the bypass with the extra key (556u isn't it?)?

Any help would be greatly appreciated... THANKS

Replies:

Posted By: mikvot
Date Posted: June 27, 2008 at 5:30 PM

Pkt2 is Toyota firmware. You need to have the bypass flashed with Honda firmware before it will work. I think pkh3 is the latest one that will work on that vehicle. Once you get that, and install manual to install it on a Honda, it should be a snap. It will tell you the wire colors and locations.

-------------

Posted By: jar754
Date Posted: June 27, 2008 at 5:34 PM

i think you have the wrong firmware,i believe it should be the pkh3, the one you have is for toyota/lexus. and you would wire that one as follows it is a white connector in vehicle
brown wire = remote start alarm shutdown
blue wire and pink wire(splice together) = find the yellow/black wire in car and cut attach these wires to the side going to the ecm
pink/white wire = goes to the other side of the yellow/black wire you just cut(this goes to the ignitionswitch
violet wire = attach to the RED / blue
red wire = 12v constant
black wire = chassis ground or you can spile into the BROWN / yellow wire

Posted By: mikvot
Date Posted: June 27, 2008 at 5:41 PM

Here is a link to the install manual for Honda https://www.bypasskit.com/getdocument.aspx?documentid=403

-------------

Posted By: jar754
Date Posted: June 27, 2008 at 5:43 PM

thanks there mikvot for i am computer illiterate and dont know how to set up links. i guess i should learn eh

Posted By: jzone
Date Posted: June 27, 2008 at 5:53 PM

Yeah on the instructions it says Toyota/Lexus. How do I go about changing the firmware? Do I have to buy a new bypass with the Honda firmware?

so on the key hole itself, its the white plug, and what color wire do I cut?

Posted By: mikvot
Date Posted: June 27, 2008 at 6:01 PM

Just find a local shop that uses that brand of bypass, and they should be able to flash it for you. yellow/black is the wire that needs to be cut.

-------------

Posted By: jzone
Date Posted: June 27, 2008 at 7:32 PM

thanks a bunch, you've been more than helpful!!