Intergrating Pager to existing alarm.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10578
Printed Date: July 22, 2025 at 6:59 PM
Topic: Intergrating Pager to existing alarm.
Posted By: Romey-ROme
Subject: Intergrating Pager to existing alarm.
Date Posted: March 08, 2003 at 8:23 AM
I have a Clifford AG4, and I really like the Matrix RS3 pager. Can I hook thiese together somehow? Or is it better to just replace my AG4 with an RS3. I don't see much difference in features, except the proximity sensor, which is probably interchangeable between the two. Any thoughts?
Thanks
Roman.
Replies:
Posted By: Chris Luongo
Date Posted: March 08, 2003 at 10:35 AM
The Clifford AG4 is a very special system. I've never installed one, but I've read the manuals---it's miles ahead of that RS3 thing, which is just a redadged Viper.
From what I understand, the AG4 works best when you use the accessories meant to go with it...although I think you could probably add any kind of pager if you needed to.
Go to the forums at www.carsound.com and find JbondoX. He installs a lot of AG4s, and know plenty about them.
|