08 silverado, alarm/remote start?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105870
Printed Date: May 01, 2024 at 9:53 PM
Topic: 08 silverado, alarm/remote start?
Posted By: triplej
Subject: 08 silverado, alarm/remote start?
Date Posted: July 02, 2008 at 12:46 PM
I have a 2008 chevrolet silverado 1500ls I am Installing a hornet 563t alarm/remote start with a DE 1701g bypass module. My question is do i still have to wire in relays with this remote start?? or should i stick with the xk01/xk06 configuration??
Replies:
Posted By: dtk1
Date Posted: July 02, 2008 at 9:57 PM
1701G wire up the realy with resistors and your done
Posted By: Velocity Motors
Date Posted: July 03, 2008 at 9:20 AM
Use the XK modules or the iDatalink modules and no need for resistors or relays.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: smcshark
Date Posted: July 03, 2008 at 12:29 PM
use I data link module for that truck, ADS-DLSL-GM, XK01-xk06 has had issues with lock up on theft system, forget relays and resitors.
-------------
Automotive Electronic Specialist
Posted By: triplej
Date Posted: July 10, 2008 at 12:17 AM
It appears that all wires are terminated correctly, and the remote start goes through all the steps except cranking over, green flashing light on the ads-dl when remote start is initiated, receiving signal from the RS starter line, and now im just going in circles!! Have you seen this in the past???
Posted By: smcshark
Date Posted: July 10, 2008 at 8:11 AM
I have seen this B4, it is a problem with the ADS-DLSL-GM, double check all your wire connections, then follow the rest procedure and try to program again. Follow the instructions very closly, from there you should be fine.
-------------
Automotive Electronic Specialist
Posted By: smcshark
Date Posted: July 10, 2008 at 8:12 AM
I meant follow the reset proceedure
-------------
Automotive Electronic Specialist
|