Print Page | Close Window

astro vss 113

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105908
Printed Date: June 07, 2024 at 10:23 PM


Topic: astro vss 113

Posted By: KarTuneMan
Subject: astro vss 113
Date Posted: July 03, 2008 at 8:06 PM

This unit is DEI thru and thru. Astroflex, made in Taiwan, gads that wizes me off. ANYWAYS.......

The lock output harness, a 2 pin plug. Listed as so. Blue, negative unlock AND (+)POS lock output

                                                                                          Brown NEG(-) lock, AND (+)POS unlock output.

How does this work? There is nothing listed in the install guide, wich simply states what I have just typed.

It also says on the guide that is listed in the Astrochart, that wireing instructions are listed IN THE Astrochart...... ....................... NOT!

My friends, change is hard for an old fart likeme. I am "old school" Astro. (pre destructive electronics inc.)

I know that there are some DEI guys laughing their arses off, and thats OK, just splain it to me Lucy.

Thanks WAY in advance gentlemen.



-------------



Replies:

Posted By: big sexy lac
Date Posted: July 03, 2008 at 8:46 PM
Say you have neg.locks you would connect brown to lock and blue to unlock.
And if you have pos.locks you would connect blue to lock an brown to unlock

-------------
WELL?



Posted By: KarTuneMan
Date Posted: July 03, 2008 at 9:35 PM

As I thought..... but needed confirmation...

Thank you !



-------------


Print Page | Close Window