Print Page | Close Window

727t with a remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106012
Printed Date: May 15, 2024 at 3:58 PM


Topic: 727t with a remote start

Posted By: 2003kawasaki
Subject: 727t with a remote start
Date Posted: July 09, 2008 at 9:37 AM

When installing a Hornet 727T with a remote start  Valet 561T, How can I defeat the alram?

Will this work with the Yellow wire (h1/9)? Or is there another way of doing this?

Thanks,

Kurt




Replies:

Posted By: Big Dog
Date Posted: July 09, 2008 at 2:50 PM

Remove the H1/9 of the 727 from ignition and connect it to the H1/3 of the 561T.

Also, the H2/5 gray wire of the 727T will need a positive input in order to shunt the on-board shock sensor. Use the status output wire of the 561T to drive a relay which inverses the polarity to a positive going signal to the gray H2/5.



-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.


Print Page | Close Window