Print Page | Close Window

’93 mustang keyless codealarm ca 170

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106049
Printed Date: May 06, 2024 at 2:15 AM


Topic: ’93 mustang keyless codealarm ca 170

Posted By: alstaregixxer
Subject: ’93 mustang keyless codealarm ca 170
Date Posted: July 10, 2008 at 8:24 PM

I know the 5 wire lock system has been discussed on here many times. This has got me stumped. I'm installing a CodeAlarm CA-170 alarm w/ keyless in a '93 Mustang. I've wired in 2 relays using both, the diagram found on this site as well as the way the install manual describes doing it. With everything hooked up to the relays, the factory door switches function normally. But when I arm/lock the alarm, the +12v relay feed wire fuse pops. I've tested the wires to be sure that I have the switch and motor sides of the wires in the right spot on the relays. I'm acessing the pink/green and pink / YELLOW lock/unlock wires at the drivers kick panel below a gray plug.

I'm really beyond frustrated at this point, I've spent most of today on this with no solution.

Thanks in advance for any help you guys might offer....N



-------------
Hey, is this supposed to spark like that?



Replies:

Posted By: alstaregixxer
Date Posted: July 11, 2008 at 6:22 PM
I got it fixed. It's nice to figure things out, I hate letting it beat me...lol 

-------------
Hey, is this supposed to spark like that?


Print Page | Close Window