Print Page | Close Window

12 channel remote wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106102
Printed Date: July 03, 2025 at 11:22 AM


Topic: 12 channel remote wiring

Posted By: ready247
Subject: 12 channel remote wiring
Date Posted: July 13, 2008 at 5:12 PM

Well that's the best I could do for a  subject....

Here is what I have in mind, I have a 12 channel keyless entry system what I want to do is be able to control 2 windows, and 2 linear Actuators from a single button on the remote as well as independently with seperate buttons. I do not have window controllers or linear Actuator motor controllers yet, I haven't even bought the linear Actuators yet any suggestions on brands would be appreciated I hope I have explained what I'm trying to do.

Also if I wanted to open the doors with button without the remote couldn't I just wire another set of relays right to the solenoids?

This is the remote I have https://www.avsontheweb.com/product.php?productid=6&cat=137&page=1

The vehicle is a 1987 chev s10 up but it has a painless wiring harness in it

Thanks for your help

thanks for your help

Paul




Replies:

Posted By: ready247
Date Posted: July 14, 2008 at 10:05 PM
was i not clear what i wanted or just no one knows my answer?



Posted By: i am an idiot
Date Posted: July 14, 2008 at 11:47 PM
I have no idea what brand actuators or window modules you need to get. But after you get them I can assist with the wiring of the relays.



Posted By: ready247
Date Posted: July 19, 2008 at 9:50 AM
no one else has any ideas?


Print Page | Close Window