Print Page | Close Window

galaxy 5000 rs, 97 f150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106105
Printed Date: May 17, 2025 at 12:51 AM


Topic: galaxy 5000 rs, 97 f150

Posted By: mig25
Subject: galaxy 5000 rs, 97 f150
Date Posted: July 13, 2008 at 7:48 PM

I am attempting to install a Galaxy 5000 RS in my Ford F150 1997 I followed the instructions but the alrm does not work. Does not lock my doors and does not start the engine. Few wires I had problems finding . Factory system re arm wire (-) and door lock Instructions are a bit confusing, I so many wires need a constan 12V I guess they can be bundled together and hooked to the +12V from battery. Also I had trouble finding dark green wire on by driver's side kick panel. Can someone advise ? thanks.



Replies:

Posted By: KarTuneMan
Date Posted: July 13, 2008 at 9:07 PM
If you are using a DMM it shouldn't be a problem fining the 12v supply. There are 2.  yellow, and GREEN/ purple. on the ign. harness.

-------------



Posted By: mig25
Date Posted: July 14, 2008 at 8:15 AM

Would someone with any experience know which of these wires does not need to be connected ?

I know that the Gray one for trunk release and the Blue and Yellow for Glow plugs do not need to be connected.

This is for my 1997 Ford F150 V8 4.6 4x4 automatic.

https://www.scytek.net/manuals/galaxy/g5000RS-2W.pdf




Posted By: i am an idiot
Date Posted: July 14, 2008 at 9:36 AM

Hey KTM, why would anyone use a DMM, when they can just come here and let us find the wires for them.   Those DMM things are SO pre-internet.




Posted By: KarTuneMan
Date Posted: July 14, 2008 at 12:06 PM

I know.    And reading....? Way to hard

Mig, match the in's and out's from the brain to the appropriate wires at the truck.  On the brain, an input "receives" and output "gives"

Test, and test again, then make your connection.



-------------


Print Page | Close Window