windows rollup output assistance

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106142
Printed Date: October 31, 2024 at 6:59 PM

Topic: windows rollup output assistance

Posted By: cecilpeter
Subject: windows rollup output assistance
Date Posted: July 15, 2008 at 10:57 AM

Hi Team,

I have a 2002 Model Hyundai Accent ,

I have also recently got a Keyless entry system from Rclick which gives out a Windows rollup output when the Lock Door or ARM mode is selected on the remote.

I need your assistance in letting me know as to how I can setup this Windows rollup output with the existing Power windows setup so that the windows can rollup when the car is Armed ?

Please Help.

Regards,

Cecil.

Replies:

Posted By: howie ll
Date Posted: July 15, 2008 at 11:12 AM

You would need a DEI 529t or 530t or similar wired to the motors to add to the roll-up wire which I assume is either a constant or timed output which goes negative when the vehicle is locked.

Print Page | Close Window