Keyless entry problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10616
Printed Date: July 27, 2025 at 6:04 PM
Topic: Keyless entry problems
Posted By: indiglo21
Subject: Keyless entry problems
Date Posted: March 08, 2003 at 7:32 PM
I have a '98 Mitsubishi Eclipse and I cannot get the lock wires to work when hooked up to my keyless entry unit. My unit can be used with negative and positive wiring. I have hooked up my unlock wires and they are working fine. Any help would be appreciated.
Replies:
Posted By: Haku
Date Posted: March 08, 2003 at 7:56 PM
Be more specific, they should be -pulse, which wires are you hooked too.
-------------
Hak
Siemens Autostart
Posted By: indiglo21
Date Posted: March 08, 2003 at 8:17 PM
I am hooked up to the unlock wire (brown), the lock wire (BROWN / white), 12v (white), ignition (BLACK/ white), ground, and parking lights + (GREEN/ red). Everything is working fine exept when I try to lock the vechicle using the remote.
Posted By: Haku
Date Posted: March 08, 2003 at 8:21 PM
POWER LOCK|RED / blue |- |*1 POWER UNLOCK|BROWN / red |- |*1 *1 Located behind the glove box in a harness. This should get you going. ------------- Hak
Siemens Autostart
Posted By: indiglo21
Date Posted: March 08, 2003 at 9:35 PM
I couldn't find them behind the glove box so I took the door panel off and tapped into the wires from there. Right as they come out of the lock module. Is this wrong??
Posted By: Haku
Date Posted: March 08, 2003 at 10:15 PM
I just checked the wiring diagram on the drivers switch, and It should work the way you have it. I would double check your connection inside the door, and if you have a dmm, I would double check and make sure your connected to the correct wire, and also check to see if your output from the unit shows ground when you request a door lock. If you would like, email me and i will email you back the wiring diagrams for the door locks, from Alldata. ip3@centurytel.net ------------- Hak
Siemens Autostart
|