Hey guys, I would like to apologize before hand if this is a dupe post, I did a search and didn’t find anything similar. I have the Omega AL-100F unit that is a full feature car alarm but utilizes the stock keyless entry system. I know all the basics but have a question about the WHITE 6-PIN connector if you have any knowledge of this unit in particular can you please help, I don’t know all these override things and don’t want to mess up the unit during install, any help would be awesome!!!
I drive a 2008 Lancer GTS with navi
Is this unit as good as the DEI units??
Also, Can I use DEI shock sensor/window roll ups/motion sensors??
ok I have figured out this first part, but have another question if ANY of you guys know this....
I lock my car, and it lock, all good, alarm armed.... when I unlock right away it disarms the alarm fine, BUT if I leave the car LOCKED for a long period of time, it seems like the car forgets there is an alarm, and when I unlock it unlocks the doors, but doesnt disarm the alarm.... so if you have ANY suggestions at all PLEASE let me know.
ALSO will the DEI sensor units work with this omega unit?
Thanks!!!
I lock my car, and it locks, all good, alarm armed.... when I unlock right away it disarms the alarm fine, BUT if I leave the car LOCKED for a long period of time, it seems like the car forgets there is an alarm, and when I press unlock it unlocks the doors, but doesnt disarm the alarm.... so if you have ANY suggestions at all PLEASE let me know.
P.S. The unit is the AL-100 the unit you add to upgrade your stock keyless to a full fledged alarm.
ALSO will the DEI sensor units work with this omega unit?
Thanks!!!