Print Page | Close Window

infinity g20 disarm and rearm wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106379
Printed Date: May 13, 2025 at 3:47 PM


Topic: infinity g20 disarm and rearm wires

Posted By: rt4x4
Subject: infinity g20 disarm and rearm wires
Date Posted: July 26, 2008 at 7:52 PM

Could someone tell how to wire the alarm disarm and rearm wires using a viper 571xv in a 2000 infinity G20



Replies:

Posted By: i am an idiot
Date Posted: July 26, 2008 at 8:35 PM
Door LockYellow (-) Module left of Steering Column 
Door UnlockLight GREEN/ Red (-) Module left of Steering Column 

This info is off of the Vehicle Wiring Database on this site.  The info on the Audiovox site names these 2 wires as factory arm and disarm.  They also say that lock and unlock arms and disarms the factory alarm.  You would need to connect the unlock wire of your alarm to the light GREEN/ red wire and connect the lock wire from your alarm to the yellow wire.


Print Page | Close Window