automate am2 programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106387
Printed Date: May 10, 2025 at 3:05 PM

Topic: automate am2 programming

Posted By: kb4ob
Subject: automate am2 programming
Date Posted: July 27, 2008 at 11:24 AM

I purchased a 2004 Saturn that someone had installed the Automate AM2 remote locking system on but I did not get any instructions whatsoever with it.

I was able to obtain the user instructions from the DEI site but would like to modify the programming slightly to beep horn when armed since I am hard of hearing and cannot always hear the door locks click. I know the horn is controlled since it will sound when panic button is depressed.

Any help here would be appreciated.

Replies:

Posted By: chriswallace187
Date Posted: July 29, 2008 at 4:38 PM

There doesn't seem to be a manual for the AM2 on this site - Valet 712 has one uploaded but it's missing pages 10-11 which have the relevant info. 12volters?

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: joch1314
Date Posted: July 29, 2008 at 4:58 PM

is there an "aux" button on the remote? If there is try pushing that first then the lock button right after. I installed a viper (DEI) keyless system in my mom's car, and one in my dads car, and they both work that way. The horn is only meant to work with the panic feature, but if you hit lock/unlock right after the aux button, it works that way too! kind of sucks that you have to do it that way though.

-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..

Print Page | Close Window