2000 gs400 and viper 5900 issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106564
Printed Date: April 29, 2024 at 4:12 AM

Topic: 2000 gs400 and viper 5900 issue

Posted By: npb4me
Subject: 2000 gs400 and viper 5900 issue
Date Posted: August 04, 2008 at 10:51 AM

I installed a Viper 5900 into my GS400. I have installed this alarm many times. For some reason, this alarm doesn't want to even try to start the car. Everything else works great, but when I hit the orange button twice, I get nothing. I used a DEI XK01 and have a hidden key. Should the Viper atleast try to crank the car?

Replies:

Posted By: swamprat323
Date Posted: August 04, 2008 at 11:24 AM

look at neutral safety switch hood pin.

Posted By: enice
Date Posted: August 04, 2008 at 11:42 AM

Sounds like you didn't ground the BLACK/ white wire or it is loose. If the remote doesn't respond then thats the problem. If the remote does respond then check all your ignition harness connections and make sure the starter kill is not backwards. Last but not least....check the tach wire.

Posted By: npb4me
Date Posted: August 04, 2008 at 2:49 PM

enice] wrote:

ounds like you didn't ground the BLACK/ white wire or it is loose. If the remote doesn't respond then thats the problem. If the remote does respond then check all your ignition harness connections and make sure the starter kill is not backwards. Last but not least....check the tach wire.

I forgot to ground the BLACK/ white wire. It works great now. Thanks!!

Print Page | Close Window