Print Page | Close Window

clifford intelliguard 950

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106725
Printed Date: May 14, 2025 at 2:24 PM


Topic: clifford intelliguard 950

Posted By: joe_1
Subject: clifford intelliguard 950
Date Posted: August 12, 2008 at 1:32 PM

hi i have the above alarm that has been taken out of a vehicle with no wires marked up, does anyone know what the black wires are as they are numbered inside the actual control unit? also the alarm diagram would be handy if anyone has it,

thanks for any help given,   Joe



-------------
i am also a technician so if you have any engine trouble let me know, and i will do my best to help.



Replies:

Posted By: howie ll
Date Posted: August 12, 2008 at 2:20 PM
Your best bet would be to order new looms from armour, the cut wires would be 2 circuit immobiliser, 5amp power supply and poss ground, email me and I'll see what I can do with an install diagram, I should have some somewhere, howardscarelectrics@hotmail.co.uk, effectively this unit is now the Concept 650 Mk II.


Print Page | Close Window