dri xk01

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106778
Printed Date: May 18, 2025 at 10:18 PM

Topic: dri xk01

Posted By: jetracer
Subject: dri xk01
Date Posted: August 14, 2008 at 2:12 PM

Hi I have been doing some research on the DRI XK01 interface and I have these questions:

The car is question is an 07 Escalade

1) Will this module give me one touch window roll up using the window switches on the door?

2) This being an interface it most likely will need something else in order to do one touch window roll up, what else will I need?

Basically I am looking for a clean solution to give me one click windows roll up using the factory window switches so I can use that while driving and not just rolling up the windows when the alarm turn on.

Thanks in advance for any advise!

Replies:

Posted By: chillin420
Date Posted: August 14, 2008 at 2:23 PM

if you want one click go to a junk yard and pull the switches for an old escalade in the front door and switch with the ones you want to replace.

-------------
you can do it....
advanced MECP, lol does it really matter....
patience is a virtue

Posted By: rt4x4
Date Posted: August 14, 2008 at 8:55 PM

Im using a 530t with my xk01 and so far works ok

Posted By: jetracer
Date Posted: August 14, 2008 at 11:15 PM

rt4x4] wrote:

m using a 530t with my xk01 and so far works ok

Hi I looked up the wiring diagram of the 530t and saw that it needs to be wired to the motor which is something I am trying to avoid.

You mentioned that you are using the 530t in conjunction with the xk01, did u have to hook up the 530t to the motor wires or did u wire it up to the XK01 in a way that let you control the windows for the one touch function to work?

Thanks for your help.

Posted By: jetracer
Date Posted: August 14, 2008 at 11:24 PM

chillin420 wrote:

if you want one click go to a junk yard and pull the switches for an old escalade in the front door and switch with the ones you want to replace.

Are you saying that pre-07 Escalades have One Touch Windows Rollup from the factory?