ignition kill of my compustar 2w900fm as
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106861
Printed Date: July 18, 2025 at 10:47 AM
Topic: ignition kill of my compustar 2w900fm as
Posted By: misterfast1
Subject: ignition kill of my compustar 2w900fm as
Date Posted: August 18, 2008 at 12:37 AM
hi, i have some questions...
what wires do i have to connect to make my system ignition kill? the main reason i want to do it is because my car is standard and if i have starter kill, they can push start it, but with ignition kill they cant push start it. but i dont know what wires should go to what wires to make the relay ignition kill instead of starter kill, (after enabling the ignition kill option in the option menu). i'm not into wires, but the information i get, i will use it to explain it to my installer...
thnx in advance...
Replies:
Posted By: KarTuneMan
Date Posted: August 18, 2008 at 1:16 AM
Hook it up as stated in the install guide. Without 12 volts to the ign. the theif will get no where! PLUS, you column will be locked or destroyed. This stuff keeps honest people honest! Don't worry about it...... K -------------
Posted By: misterfast1
Date Posted: August 18, 2008 at 8:55 AM
ohh ok, but i mean, there is the option for ignition kill, and i want to know how to install it..., how do i rewire the relay for it to work as ignition kill..? can someone guide me step by step which wire should go from which pin, or relay to where..., i have already turned the option of ignition kill in panic mode on, but, the wires need to be rewired...
Posted By: tedmond
Date Posted: August 18, 2008 at 11:50 AM
if you had someone install it, dont mess with it as you can or will void the warrenty. just take it bak and ask if tey can change it from starter kill to ign kill.
Posted By: misterfast1
Date Posted: August 18, 2008 at 9:25 PM
the prob is, the one that installed it, doesnt know how exactly the wires should be re wired as stated in the manual to work as ignition kill. thats why i'm asking here, if someone that does have the same alarm installed and ignition kill programmed..
|