99 Chrysler Cirrus keyless remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10687
Printed Date: June 07, 2024 at 7:58 PM
Topic: 99 Chrysler Cirrus keyless remote
Posted By: DukOfDeath
Subject: 99 Chrysler Cirrus keyless remote
Date Posted: March 10, 2003 at 12:33 PM
I have one OEM remote and I bought another off Ebay, same FCC # and everything, is this something I can program myself or do I have to have a Chrysler dealer do it? The keyless entry is the factory installed system
------------- DUK
Replies:
Posted By: zargon
Date Posted: March 10, 2003 at 5:30 PM
to program a new key you have to have two original keys, so you will have to take it to a dealer or locksmith and have it programed.
Posted By: Two_Cold
Date Posted: March 10, 2003 at 6:23 PM
Do you wish to have your car learn a new key pod? That can be done yourself. Some dealerships will share the instructions with you.
I know in the Chrysler Minivans there was a wire above the glovebox that you grounded and pressed the keypod, but that was a few years back.
Visit your local DCX dealer and ask them how to do it for your car. It is easy to do because they program them on the assembly line and take less than 42 seconds per car to do two keypods.
Posted By: DukOfDeath
Date Posted: March 15, 2003 at 8:47 AM
NO I dont have the keys with the chips in them...Im talking about the fob keyless entry remotes to unlock the doors
------------- DUK
|