gas door

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106957
Printed Date: May 17, 2024 at 3:12 AM

Topic: gas door

Posted By: 04nata
Subject: gas door
Date Posted: August 22, 2008 at 2:34 PM

I have a Clifford Matrix RSX3.3 installed and I was wanting to wire the gas door to the alarm (since gas is gold these days) the car has a gas door switch on the inside that opens the door, so would I still have to put a pin switch in or is there some way I could wire it from the existing latch to trigger, so that if someone forces the gas door open it will set off the alarm.

Replies:

Posted By: megaman
Date Posted: August 22, 2008 at 3:39 PM

You'll need to install a pin-switch as the wire currently in the vehicle only releases the gas door.

Print Page | Close Window