Valet 552T wiring connections

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10698
Printed Date: July 20, 2025 at 1:40 AM

Topic: Valet 552T wiring connections

Posted By: MX6boii
Subject: Valet 552T wiring connections
Date Posted: March 10, 2003 at 4:53 PM

Hi, I'm about to install a Valet 552T remote start and while looking over all the wirings before I start; I have no clue where two wires go. posted_image

Where do I connect or How do I find a wire to connect:

1.Purple wire (5pin remote start harness):(-)200mA starter relay turn-on

2.An orange wire in the main harness that connects to the Starter Kill Relay:(-)500mA ground-when-armed output.

Thanks for all your help!

Replies:

Posted By: zargon
Date Posted: March 10, 2003 at 5:23 PM

The purple wire should be in a 5 wire ribbin cable and should connect connect to a relay in the main relay pack, strange that it would be cut, the orange wire goes to the starter kill relay that should of come with the 552t, it will connect to the orange wire on the starter kill relay, if you don't have a pre wired starter kill relay let us know.

Print Page | Close Window