Print Page | Close Window

viper 479v problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107043
Printed Date: May 12, 2025 at 8:30 AM


Topic: viper 479v problems

Posted By: jdmdc2
Subject: viper 479v problems
Date Posted: August 25, 2008 at 11:30 PM

i have a 96 integra integra, just recently my viper 479v/p/c alarm stoped working outta the blue.    Lets say i lock the car doors with the pager, teh doors lock and the lights flash, but if i open the car doors or push against it the alarm dosent go off and lights dont flash.   i bought my car with teh alarm  and it didnt come with any manuals  heres model specs   Viper   RPN 479v/p/c    FCC id: EZSDE1478        thanks



Replies:

Posted By: JWorm
Date Posted: August 25, 2008 at 11:55 PM
Is the l.e.d. on solid whenever the ignition is OFF? If it is, you are in valet mode.



Posted By: jdmdc2
Date Posted: August 26, 2008 at 12:11 AM
hmm. not sure. tomarrow ill check.  Lets say  i locked my car with the pager.. would the light start flashing like it was armed ... cuz mine flashes like normal when i lock the  pager..



Posted By: jdmdc2
Date Posted: August 26, 2008 at 12:32 PM
CLOSED      i got it workin


Print Page | Close Window