Print Page | Close Window

valet switch not working module?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107159
Printed Date: June 08, 2024 at 9:40 AM


Topic: valet switch not working module?

Posted By: vixentd
Subject: valet switch not working module?
Date Posted: September 01, 2008 at 5:12 PM

APS-15KB Presige auto security alarm in a motorhome.  Was working fine but now

1.  a slow flashing red light stays on when alarm is not activiated

2. When alarm is activiated the led flashes normall.

3.  When alarm is turned on, one beep, when turned off 4 beeps from siren.

We have

1.  Checked for ground at the module for valet switch and one side is ground.

2.  Checked the valet switch itself to see if it was working, and it shows on an ohm meter that it is opeing and closing.

Any thing else besides the module that might be the problem?




Replies:

Posted By: gremechar
Date Posted: September 01, 2008 at 10:05 PM

it's xlear that your 12v in the run position is ,issing


Print Page | Close Window