escalade driver door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107168
Printed Date: August 28, 2025 at 6:17 PM

Topic: escalade driver door locks

Posted By: Matrix7333
Subject: escalade driver door locks
Date Posted: September 02, 2008 at 1:56 AM

Hello all, does anyone one know what kind of locks (negative/Positive) is used in a 2006 Escalade EXT? I am trying to hook the locks up to a remote starter/alarm. Got all working except am trying to get the driver door to unlock, the alarm has a negative unlock pulse. What relay confiuration do I need if any?

Thanks

Replies:

Posted By: Twelvoltz
Date Posted: September 02, 2008 at 7:01 AM

GM switched to a databus door lock configuration on their trucks in 2003. The easiest solution for you would be to pick up a module. If you are looking to retain the driver's door priority unlocking the XK01 would do the trick. If you do not want to use a module then you would need to do a reversal circuit inside each front door with the priority unlock to the driver's unlock relay trigger and negative pulses for the rear doors.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: Matrix7333
Date Posted: September 02, 2008 at 11:40 AM

Thanks, i have a module but it was just for passlock bypass (GMBP) I just ordered the XK01, it will make things a lot easier. I came across a module already installed called GM-DT1000, it had some gps device hooked up to it, but the driver unlock priority don't work but it unlocks all the doors ok .

Thanks for your help.