viper 5000 fob

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107197
Printed Date: May 12, 2025 at 2:12 AM

Topic: viper 5000 fob

Posted By: spaspecker
Subject: viper 5000 fob
Date Posted: September 03, 2008 at 3:02 PM

I have a viper 5000 installed on my mitsubishi fto. I know about programming in new/replacement remote fobs, but can I add a different fob to my alarm, such as a clifford 650mkII? the model number of the fob is 7151X. I thought with it being DEI it should be able to but just wanted to check first

Replies:

Posted By: megaman
Date Posted: September 03, 2008 at 3:13 PM

there are four remotes that will work in your system:

489V, 474V, 473V, 471C

That's all.

Posted By: spaspecker
Date Posted: September 03, 2008 at 3:23 PM

thanks for the quick response - I asked because I was reading here

https://www.drdetailshop.com/7151X.htm

after reading the green text on the right I was under the impression that this fob MIGHT be compatible with my alarm, but your response has cleared that up for me - many thanks

Print Page | Close Window