Clifford Concept 50, How to Program Fob?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107201
Printed Date: May 12, 2025 at 3:26 PM

Topic: Clifford Concept 50, How to Program Fob?

Posted By: diddy dan
Subject: Clifford Concept 50, How to Program Fob?
Date Posted: September 03, 2008 at 7:36 PM

Hi,

Just bought an old 1994 Mazda Eunos with a Clifford Concept 50 that was installed here in the UK in June 1999 when the car was imported.

I've also bought a spare remote (FCC ID. CZ57RRTX12R) but need some advice or a set of instructions on how to program it to my system. I have the original user guide but there isn't any info on programming new fobs in it so please could someone help?

Thanks & regards,

Dan.

Replies:

Posted By: spookiestylez
Date Posted: September 03, 2008 at 10:50 PM

concept50x_owners.pdf

page 18 is for transmitters

-------------
RTFM

Posted By: howie ll
Date Posted: September 04, 2008 at 12:29 PM

There was the 50 and the 50X with completely different programming. Your best bet now would be to contact the new UK distributors, Armour Automotive and get owner manuals for each. Frankly I used to come across one of these each week and the only recourse because of it's age etc. was to bin them.

Posted By: diddy dan
Date Posted: September 04, 2008 at 12:51 PM

Thanks for the 50x user manual Spookie..... however if as you say Howie the 50 and 50x are completely different in terms of fob programming then the user manuals alone aren't going to be any help as it's definitely the 50 I have along with an original user manual and there's nothing about programming fobs in there.

Would an installation manual for a Concept 50 perhaps contain the info I need? If so can anyone out there help me out.

Thanks for the responses so far please keep em coming

Dan.

Posted By: howie ll
Date Posted: September 04, 2008 at 1:07 PM

You need to know your original valet code!

Posted By: diddy dan
Date Posted: September 09, 2008 at 4:05 PM

Thanks howie; I have the original valet code but think I need a concept 50x instalation manual..... can anyone help please?

Posted By: OmarR
Date Posted: September 09, 2008 at 7:27 PM

https://www.guardianalarms.net/home_security_manuals/home-security-manuals-clifford-electronics.htm

Posted By: diddy dan
Date Posted: September 10, 2008 at 6:09 PM

Thanks OmarR thats just the ticket and thanks to everyone else who's also helped me out!

Dan posted_image