04 highlander toydl databus

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107208
Printed Date: May 13, 2025 at 12:46 PM

Topic: 04 highlander toydl databus

Posted By: cerivera
Subject: 04 highlander toydl databus
Date Posted: September 04, 2008 at 11:54 AM

I'm planning on using the toydl (databus) door lock interface instead of going through the doors. I'm looking at the instructions online and it states for one of the wires.....Brown (-) negative ground out when running remote start....Is this used for the keysense of the remote start?

Its for a 2004 Toyota Highlander Non Oem security

thanks

Replies:

Posted By: kgerry
Date Posted: September 04, 2008 at 2:50 PM

you dont need to hook that up... just the doorlock wires to your unit and the data wire in the DKP (plus power & ground obviously)

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: Chris Luongo
Date Posted: September 05, 2008 at 4:35 PM

If you don't mind having all five doors unlock at once (no driver's-priority unlock), it's easy to grab the lock wires in the passenger kick panel---no need to go into the door.

Posted By: kgerry
Date Posted: September 06, 2008 at 11:58 AM

with a TOYDL you dont need to go into the door... the data wire is right there in the drivers kick .... it's a 3 minute hookup and you get priority unlock as well.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Print Page | Close Window