viper 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107227
Printed Date: May 12, 2025 at 2:39 PM

Topic: viper 791xv

Posted By: js79
Subject: viper 791xv
Date Posted: September 04, 2008 at 11:35 PM

I had a Viper 791xv installed on a 2002 highlander. The default was passive arming after 30sec. and when i hit the open door/arming off button it would wait at least 30sec+ before it rearms.

I traded in that car and i moved the alarm into a 2008 hughlander. remote start works. Alarm works. But alarm will not activate like before after 30sec and now when i hit door open/alarm off it re-activates after 5sec even with door open.

How can I get it to work as it did in the 2002 highlander.

02 was pro installed 08 was done by a semi-pro/friend.

Replies:

Posted By: megaman
Date Posted: September 04, 2008 at 11:40 PM

check your door pins to make sure the alarm is triggering with the door. Then it's a programming issue.

Posted By: dtk1
Date Posted: September 05, 2008 at 12:35 AM

in my opinion i don't think you got the right door pins that car has 4 separate door pins

Posted By: Mike M2
Date Posted: September 05, 2008 at 6:32 AM

It doesn't need to be separate door pins, you can use the dome light wire to trigger all....

-------------
Mike M2
Tech Manager
CS Dealer Services