audiovox prestige aps 920
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107239
Printed Date: April 28, 2024 at 6:29 PM
Topic: audiovox prestige aps 920
Posted By: rokhedjo
Subject: audiovox prestige aps 920
Date Posted: September 05, 2008 at 4:53 PM
Hello to all, I am new to car remote starts and alarms, but not to auto electrical . My son bought a Audiovox aps-920 off e-bay, and now I have to hook it up in his 2006 Toyota Tundra X-SP double cab.I have looked on her e and found the wiring diagram for the toyota, but there are some grey areas that I am not so sure of. I will be glad to help in any way to get a direct wire to wire hookup of this unit. I mostly have a problem with some of the low currnt hookups that may not have to be used. there are links on the audiovox website for the wireing on this unit. Any and all help will be appreciated.
-------------
Im here and your not
Replies:
Posted By: rokhedjo
Date Posted: September 06, 2008 at 8:45 AM
C'mon guys , help a brother out here, my son will kill me if I dont hook this thing up right. and I dont want to start without knowing I can finish in a day.
-------------
Im here and your not
Posted By: installmarc
Date Posted: September 06, 2008 at 11:40 AM
what exactly are you looking for
Posted By: Mike M2
Date Posted: September 06, 2008 at 1:38 PM
Agreed, you must tell us what you need help with!
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: rokhedjo
Date Posted: September 07, 2008 at 1:27 PM
I know it is alot to ask, but I would like a wire to wire hookup for this alarm and remote start. I have reviewed the wiring instructions, I want a basic install diagram with just start and alarm. I may be asking too much, but if you dont ask you dont get, right? ------------- Im here and your not
Posted By: Mike M2
Date Posted: September 07, 2008 at 9:10 PM
Wow that is a lot to ask! You can get a wiring diagram for that truck here on this site but unless you know what each wires function is on your alarm your not going to know what goes where. I don't mean to be mean, but you don't sound like you are able to install this. I suggest letting a pro tackle the install....
-------------
Mike M2
Tech Manager
CS Dealer Services
|