viper 5900 into 01 tacoma

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107249
Printed Date: May 12, 2025 at 2:22 PM

Topic: viper 5900 into 01 tacoma

Posted By: quadracer70
Subject: viper 5900 into 01 tacoma
Date Posted: September 05, 2008 at 11:25 PM

I just bought a 5900 and need some install help. I want to install it myself and need an install guide and wire diagram. THANKS

Replies:

Posted By: quadracer70
Date Posted: September 05, 2008 at 11:29 PM

quadracer70 wrote:

I just bought a 5900 and need some install help. I want to install it myself and need an install guide and wire diagram. THANKS

OH this is a stick shift, so remote start help to. posted_image

Posted By: hurleyloser
Date Posted: September 06, 2008 at 2:17 AM

i highly recommend to save yourself the headaches and take it to a professional, if you still want to attempt the install, I'm willing to help you out, I am by no means trying to discourage you. Just be prepared for a lot of work and the dangers of damaging something. A 5900 should only be installed in a manual transmission vehicle with the appropriate module that will ensure that it is not in gear to enable remote start. I've seen more manual transmission vehicles plow into something on accident than there should be. Luckly none of those cars ever hit anyone or caused any harm.

-------------
MECP Master Certified Technician
ASE A6 Certified Technician

Posted By: quadracer70
Date Posted: September 06, 2008 at 2:25 AM

I was going to call around sat or monday to see how much to get it installed, but if it is to much I might need your help. About the module, where do I get one. $$$

Posted By: quadracer70
Date Posted: September 06, 2008 at 9:59 PM

I have been trying to find a wiring diagram for the DEI 689M. Anyone have one??