number of relays required for python 950

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107332
Printed Date: July 17, 2025 at 2:34 PM

Topic: number of relays required for python 950

Posted By: snake07
Subject: number of relays required for python 950
Date Posted: September 09, 2008 at 11:48 AM

Hi all,

I'd like to install the remote starter for my car and the Python 950 is the one I'm planning to use.

I know I need 1 relay for anti grind and starter and I don't know if I need relay for door lock ?

Please be advice how many relay do I need in total ?

Thank you in advance,

Replies:

Posted By: howie ll
Date Posted: September 09, 2008 at 12:37 PM

I relay is anti-grind and starter cut. What car, it would help so we could answer your question.

Posted By: snake07
Date Posted: September 09, 2008 at 12:44 PM

Thank you for your reply,

It's the 04 Acura MDX.

Posted By: howie ll
Date Posted: September 09, 2008 at 12:46 PM

Sorry just used Directechs and I don't think you need a relay anyway, the starter in and out wires should accomodate the anti grind.

Posted By: howie ll
Date Posted: September 09, 2008 at 12:52 PM

Just checked vehicle wiring on this sight, direct low current neg locking blue and green from your 950, no relay required.

Posted By: snake07
Date Posted: September 09, 2008 at 1:26 PM

Thank you,

I also planning to use the Idatalink ADS- TBSL HA transponder for Immobilizer bypass.

Do you think it's going to be plug and play ?

Print Page | Close Window