parking lamps

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10739
Printed Date: July 22, 2025 at 5:10 AM

Topic: parking lamps

Posted By: jeremy1
Subject: parking lamps
Date Posted: March 11, 2003 at 12:25 PM

I am looking for aparking light issolation relay diagram I have wired it the way i thought it should go but am still having the same problem as soon as the module sends power to the lights the r/starter shuts down if I dissconnect the lights the remote works fine..thanks

Replies:

Posted By: jrilla
Date Posted: March 11, 2003 at 1:22 PM

What car? and What Starter? This type of info is very helpful in determining the problem.

A basic isolation setup is like this though:

Pin 85 to ground
Pin 86 to parking light output
Pin 30 to cut parking light wire
Pin 87a to switch side of cut parking light wire
Pin 87 to 12v+ constant fused

-------------
J Rilla

Owner/Installer

Posted By: jeremy1
Date Posted: March 11, 2003 at 1:32 PM

sorry. 94 chevy lumina z24 and a bulldog rs1300e. thanks for your help. i think i got it.

Posted By: jrilla
Date Posted: March 11, 2003 at 2:00 PM

That is strange, I dont see any notes about isolating a Lumina's parking lights. But if that solves your problem then you're welcome. How did you think to unplug your parking light wire. That just isnt one of my top troubleshooting tactics, so I was just curious.

-------------
J Rilla

Owner/Installer

Posted By: jeremy1
Date Posted: March 12, 2003 at 2:10 PM

I came up with it because I was desperate and running out of options. I was to the point of watching wether or not the sun was coming through the windows and hitting the car at the exact moment it shut off. posted_image

It seems to have worked though, thanks for all your help.

Print Page | Close Window