possible to use rs remote for dei alarm?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107415
Printed Date: October 31, 2025 at 1:46 AM
Topic: possible to use rs remote for dei alarm?
Posted By: lexelite
Subject: possible to use rs remote for dei alarm?
Date Posted: September 13, 2008 at 8:24 PM
Is it possible to use a remote start remote (Viper 160xvl) to arm/disarm a DEI alarm (possibly Python 660XP or Viper 600)?
The remote start unit has a range of 1 mile and does almost everything (doors lock/unlock, starter kill, led, etc), except it does not have an instant trigger for the panic.
Would like to add a basic DEI alarm, however, I would not want to use the inferior basic remote with the unit.
Is there a way to configure the DEI alarm to disarm/arm with the doors locking(this would allow the 160xvl to remain as the primary unit)? Is their another way?
Replies:
Posted By: Velocity Motors
Date Posted: September 14, 2008 at 9:18 AM
The alarm ( Python 660XP or Viper 600 ) does not act a a slave unit to another device and can not be controlled by a RS.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: lexelite
Date Posted: September 14, 2008 at 9:59 AM
Thanks Jeff, I was afraid of that. I will be replacing the the entire unit with a Viper 5301C. The harnesses are almost identical.
|