adding keyless to 96 f150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107429
Printed Date: May 15, 2025 at 6:44 PM

Topic: adding keyless to 96 f150

Posted By: aperez70
Subject: adding keyless to 96 f150
Date Posted: September 14, 2008 at 12:05 PM

hello all. I purchased a python alarm with keyless for my 96 f150 xlt with powerlocks and no factory keyless. i have the alarm installed and am tring to wire up my keyless. i found the wires in the passenger kick panel and cut them . hooked up my alarm wirng to the wires and nothing works. i pop a fuse (s) ..is there a wiring diagram that can show me what wire goes where???? thanks

Replies:

Posted By: KarTuneMan
Date Posted: September 14, 2008 at 12:43 PM

the connections you made are backwards. On the wire you cut, you have the switch side, and the motor side. the wires from your unit/relays.... switch them

-------------

Print Page | Close Window