viper 5002 door lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107469
Printed Date: May 18, 2024 at 11:16 PM

Topic: viper 5002 door lock

Posted By: autocadpro
Subject: viper 5002 door lock
Date Posted: September 15, 2008 at 3:53 PM

I have a Viper 5002 Alarm System. I have installed the 5002 Alarm along with 4 door actuators. After researching wiring diagrams and reading the installation manual over and over I have no idea how to properly wire up this systems door locks.

I would like to wire the driver door to open with one button push and I would like the other doors to open with two pushes.

I have made a template for a diagram. I have attached a jpeg file for easy editing. Can someone please illustrate the wiring diagram I have provided?

Is it also possible to have the doors lock automatically after I start driving?

Any help would be greatly appreciated.

]Diagram Jpeg[/URL]

Replies:

Posted By: ringojam
Date Posted: September 15, 2008 at 7:18 PM

OK you cannot lock the doors after driving there is no rpm sensor for the viper. I will try and contact tommorrow and tell you how to wire it up,but you need to get a 5pin relay to do progressive door locks.

-------------
Jamaica home of the worlds fastest man.

Posted By: autocadpro
Date Posted: September 15, 2008 at 9:50 PM

Thank you for the help. If you need more information let me know.

Posted By: autocadpro
Date Posted: January 05, 2010 at 7:52 PM

Two years later and I still haven't been able to figure out how to wire aftermarket Progressive door locks. Can anyone please complete the wiring diagram above?

Thank you