Print Page | Close Window

1996 Sunfire GT & Autopage rs750

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10753
Printed Date: July 26, 2025 at 2:46 AM


Topic: 1996 Sunfire GT & Autopage rs750

Posted By: RaveChild
Subject: 1996 Sunfire GT & Autopage rs750
Date Posted: March 11, 2003 at 3:55 PM

Do I need to diode isolate my door triggers with this alarm?? If so how do I do that?



Replies:

Posted By: Velocity Motors
Date Posted: March 11, 2003 at 4:21 PM

Yes you do. DOOR TRIGGER----------grn/blk & lt. blue .  The GREEN/ black is located in the lower drivers kick panel.  It catches the drivers door only.  The light blue is located in the lower passenger kick panel, and catches the passenger door(s).

posted_image



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: RaveChild
Date Posted: March 11, 2003 at 4:23 PM
ok what are those things between the door triggers and the wire for the alarm.  Where can I get them??



Posted By: Velocity Motors
Date Posted: March 11, 2003 at 4:38 PM
Those are your diodes & you can get them at any electronics shop.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: RaveChild
Date Posted: March 11, 2003 at 8:01 PM
What voltage do the diodes need to be??



Posted By: Velocity Motors
Date Posted: March 11, 2003 at 8:04 PM
Get some 1N4001 1 amp diodes. This should be more than enough.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: RaveChild
Date Posted: March 12, 2003 at 4:12 PM

Will these ones work???

Micro Diodes: Type: 1N4001. 50 PIV. 2 per pack


Print Page | Close Window