starter kill and anti grind

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107569
Printed Date: June 04, 2024 at 2:39 PM

Topic: starter kill and anti grind

Posted By: linedriver
Subject: starter kill and anti grind
Date Posted: September 20, 2008 at 12:09 PM

i will be doing my very first remote starter/alarm install of a polar start remote starter/alarm and i have a couple questions in general. would it be possible to use the 'ground out when running' feature along with starter kill output since their both negative outputs and use just a single relay for my starter kill and anti grind feature?

also, it has a wire which says 'priority door output', and a parking light output, both as a negative output. what do those 2 outputs do? i figured the positive door input would have been the trigger for the alarm or something.

also, if anyone has a wiring diagram for a 1990 nissan skyline, that would be great

Replies:

Posted By: KarTuneMan
Date Posted: September 20, 2008 at 8:18 PM

Priority door output is for door unlock. it's used to trigger the DRIVERS door unlock only. Then the "main" unlock" (second unlock)

will do the remaining doors....

Alot of units have both POS+, and NEG- parking light outputs. Use the one you need.

Posted By: howie ll
Date Posted: September 21, 2008 at 9:08 AM

You wil probably need a door lock actuator in the driver's door for that one, use your priority control to relay the unlock motor wire for that unit then lock all via the driver door sdded actuator lock wire.