viper 791 disarm button change
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107576
Printed Date: May 15, 2025 at 6:35 PM
Topic: viper 791 disarm button change
Posted By: ikhmaifosho
Subject: viper 791 disarm button change
Date Posted: September 20, 2008 at 6:41 PM
hi i just installed a viper 791vx into a 2004 Honda odyssey and it was working fine once i finished. remote start and alarm, until i tried to program the flashing lights into constant lights during remote start. Now when i try to unlock/disarm the car it shows a number 5 on the LCD screen and doesn't do anything ? please help
Replies:
Posted By: ringojam
Date Posted: September 20, 2008 at 8:06 PM
Check the button on rear of the transmitter you need to change it to car 1 i think its on car 5 check yr owner manual and see how to change this parameter.I think this might be yr problem ....
-------------
Jamaica home of the worlds fastest man.
Posted By: ikhmaifosho
Date Posted: September 20, 2008 at 9:44 PM
pretty much i want to setup the transmitter to learn another transmitter so i can unlock the car or erase and set back to default settings
Posted By: JWorm
Date Posted: September 20, 2008 at 10:45 PM
Open door. Turn ignition ON. Press valet button 12 times. Press a 13th time and HOLD it. Wait until siren chirps 12 times. Press lock on the remote. Release valet button and turn ignition OFF. All your remotes should NOT work at this point.
Turn ignition ON. Press valet button 1 time. Press a 2nd time and HOLD it. Siren will chirp 1 time. Press lock on the remote. If you have multiple remotes, press lock on all remotes...1 remote at a time. Release valet button turn ignition OFF.
Posted By: ikhmaifosho
Date Posted: September 21, 2008 at 1:24 AM
nice but can this be possible if the alarm is still armed as i can't unlock/disarm the alarm
Posted By: JWorm
Date Posted: September 21, 2008 at 11:41 PM
Open the door with the key, the alarm will go off. Turn the ignition ON, press the valet button 1 time....wait....alarm shuts off. Turn Ignition OFF...alarm is disarmed. Wait at least 15 seconds, then do what I listed above.
|