Print Page | Close Window

ungo rs10 activation input wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107610
Printed Date: May 14, 2025 at 1:55 AM


Topic: ungo rs10 activation input wire

Posted By: downhill3r
Subject: ungo rs10 activation input wire
Date Posted: September 22, 2008 at 12:09 PM

I have a 1996 Toyota T100 and I am trying to figure out where the Activation Input Wire (+) and the Activation Input Wire (-) go. If anyone knows please let me know.



Replies:

Posted By: another-kelly
Date Posted: September 22, 2008 at 9:09 PM
they don't unless you're wanting something (factory keyless entry) to trigger the remote start


Print Page | Close Window