directfax document 1083

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107626
Printed Date: May 23, 2025 at 10:27 AM

Topic: directfax document 1083

Posted By: adaseb
Subject: directfax document 1083
Date Posted: September 22, 2008 at 7:35 PM

Does anyone have this document handy that you can PM me or post the link?

Replies:

Posted By: adaseb
Date Posted: September 22, 2008 at 8:05 PM

And also Document 1082 I need.

Thanks in advance.

Posted By: chriswallace187
Date Posted: September 23, 2008 at 1:45 AM

1082 is in the Downloads section of this site; click the link at the top of the page and search for it.
I don't have access to 1083 but if you could post the sentence from DEI's tech info that mentions it I can probably draw the equivalent from memory.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: chriswallace187
Date Posted: September 23, 2008 at 1:48 AM

Better yet, check this post here. It helps to search first.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: adaseb
Date Posted: September 23, 2008 at 2:06 AM

Its seem that the procedure is different from what I was originally supplied with.

With that document for the Chrysler Second Start it states to cut the PURPLE / Brown wire and attach to the 87a and 30 connectors with 87a going to a 180Ohm ground.

My originally instructions where to connect

85 to Starter wire output
86 to Ground When Running output
87 to 180Ohm resistor in series with a connection to the multiplexed second starter
87a blank
30 ground.

Which ones are correct?

Posted By: adaseb
Date Posted: September 23, 2008 at 2:23 AM

Here is a picture of the original instructions that I was given.

posted_image

Print Page | Close Window