viper 790xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107713
Printed Date: July 05, 2025 at 3:02 AM

Topic: viper 790xv

Posted By: themikesayz
Subject: viper 790xv
Date Posted: September 26, 2008 at 12:53 AM

Hi guys, I have a problem with my alarm(viper 790xv) I have to replace my remote and got the 479v. I do not have the remote start feature hooked up. I followed the steps on the back of the package to program the remote for standard configuration, but for some reason it programs to the single button configuration. What can be the problem? Any info will be greatly appreciated. Thanks

Replies:

Posted By: Mark Mizenko
Date Posted: September 26, 2008 at 5:13 PM

I think your'e old 790XV needs to have the remote programmed into position 6 or 7, NOT 1, like it says on the back of the package. Open the door, turn the key and press and release the valet button SIX times, then press and hold, then press lock. Try that. You may have to do position SEVEN. If you can peek at a 790XV manual, for TX programming, that would tell you, 6 or 7. but position 1 OEM Config, is for the 791 and newer systems.

Posted By: themikesayz
Date Posted: September 26, 2008 at 8:31 PM

ok Ill try that. Thanks

Posted By: kgerry
Date Posted: September 27, 2008 at 1:58 PM

ACTUALLY I THINK THAT MODEL WAS 8....for auto learn

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Print Page | Close Window