clifford3.3x programming problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107750
Printed Date: May 04, 2024 at 12:46 PM

Topic: clifford3.3x programming problem

Posted By: scalin6
Subject: clifford3.3x programming problem
Date Posted: September 27, 2008 at 5:58 PM

I installed a clifford 3.3X responder le on a 2008 tacoma(automatic transmission).The alarm works, but it doesn't start from remote.Tach learning went fine, but it just doesn't work.When i press the remote start button, the light next to the "function" button light goes on for a second or two and it beeps(like when it's out of range).
I tried this standing next to the car, i tried it with the key in ignition, and the same.
Could anyone please help me with this thing?I just don't know what else to do, i tried to reset it to factory settings, and the same.Any opinion is appreciated.
Thank you Calin.

Replies:

Posted By: megaman
Date Posted: September 27, 2008 at 10:12 PM

You must program the unit for automatic transmissions. It comes factory defaul to Manual transmission.

Menu 3: item 1

Option 1 is Manual transmission - default setting

Option 2 is Automatic Transmission

Posted By: 04nata
Date Posted: November 17, 2008 at 10:15 PM

WHen I got mine installed the blue led on the inside flashed when armed, now it doesn't thanx to my 2 year old and a flashing remote,,,,,,,,,,,,,,,,,,,,,,,how do I fix this so thet the led will flash again

Posted By: 04nata
Date Posted: November 18, 2008 at 8:32 AM

did I get blackballed from getting questions answered????? it seems as though my last 4 or 5 posts have went un-replied, if I broke a rule,,,,,sorry

Posted By: 04nata
Date Posted: November 19, 2008 at 8:13 AM

well I guess so....................

Posted By: 04nata
Date Posted: November 20, 2008 at 2:15 PM

Anybody have any ideas?

When I got mine installed the blue led on the inside flashed when armed, now it doesn't thanx to my 2 year old and her interest in a shiny flashing remote,,,,,,,,,,,,,,,,,,,,,,,how do I fix this so thet the led will flash again??????

Posted By: ckeeler
Date Posted: November 20, 2008 at 2:22 PM

is it in valet mode?

Posted By: 04nata
Date Posted: November 20, 2008 at 7:30 PM

nope, that was the first thing I checked