dei xk01 instructions, wiring?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107793
Printed Date: May 02, 2024 at 3:30 AM
Topic: dei xk01 instructions, wiring?
Posted By: slammedniss
Subject: dei xk01 instructions, wiring?
Date Posted: September 29, 2008 at 11:54 AM
Bought a new shop truck, and I'm gonna install remote start/keyless in it. Called about getting a 457G, and I guess it's been replaced by the XK01? I don't do remote starts on a regular basis anymore, so I've been "out-of-the-loop" for awhile.
Does anybody have an instruction manual available for download or a list of wires for the module?
Thanks
Replies:
Posted By: brhaugen
Date Posted: September 29, 2008 at 12:29 PM
The XK line of bypass kits can be "flashed" to work in many vehicles.
They come standard with AMDL loaded so I will give you a link to that manual. https://bypasskit.com/getdocument.aspx?documentid=445
Posted By: slammedniss
Date Posted: September 29, 2008 at 1:14 PM
That manual is a little hard to follow. The remote start is going on an03 Siera 1500. Is there a full english version of that manual?
Posted By: brhaugen
Date Posted: September 29, 2008 at 1:51 PM
Posted By: slammedniss
Date Posted: September 29, 2008 at 3:50 PM
much better. Doesn't look simple, but doesn't look too difficult.
Thanks!
Posted By: brhaugen
Date Posted: September 30, 2008 at 6:07 AM
If you are just doing a Remote start and not a alarm, you can forget about the door trigger wires.
Heck if you get a Starter/Alarm that has a compatible Data2Data port all you need is one cable and the purple wire.
-------------
Brent Haugen
Fargo, ND
Posted By: jdawg454
Date Posted: November 24, 2008 at 11:17 AM
Hey guys, I'm new to the site but have been doing some heavy reseach here. still slightly confused about the XK01 tho... Probably just overthinking it like usual. From what I'm gathering is the output from the Remote Start unit tells the Bypass (XK01) in this case to tell the computer via the data wire on the OBDII plug to unlock/lock the doors. Is this the case? I have an 06 Trailblazer and will be doing an RS Friday and am just confused about that part. Any clarification is greatly appreciated! Thanks guys, Jeremy
Posted By: Chris Luongo
Date Posted: November 24, 2008 at 5:45 PM
jdawg,
You'll get more responses if you make your own post with the name of your car in the subject line.
But yes, the XK01 puts out data signals on the purple wire, that command the car to lock, unlock, and turn off the Passlock II anti-theft system so the remote starter can turn on the engine.
Posted By: Fosgate3
Date Posted: November 24, 2008 at 11:57 PM
I wish it was only that easy Chris... if it was, then I'd have my questions answered too :( good luck on the xk01. i put one in an 03 silverado this w/end and it went well (ungo rk1 keyless entry and remote start). ------------- i think a wire's loose somewhere...
Posted By: jdawg454
Date Posted: November 25, 2008 at 12:56 PM
Thanks guys, Appreciate the help!
|