Using Brake As Kill Switch.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10784
Printed Date: July 27, 2025 at 11:40 PM

Topic: Using Brake As Kill Switch.

Posted By: treacher
Subject: Using Brake As Kill Switch.
Date Posted: March 12, 2003 at 12:00 AM

hello i was wondering if there was a way to wire a car so that you would have to step on the brake in order to start the car. i want to do it to my car that already has an alarm with a starter disable but i just would like to add this extra precautionary measure. any help is truly appreciated.

Replies:

Posted By: CruisinS&S
Date Posted: March 12, 2003 at 12:14 AM

https://www.the12volt.com/relays/page2.asp

Go to this section of this site

Under passive starter kill relaysjust use first relay diagramuse brake wire above pedal that shows 12volts when pressedto terminal 85 on relay

Print Page | Close Window