voice dei 516
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107923
Printed Date: May 15, 2024 at 5:17 AM
Topic: voice dei 516
Posted By: bryandamatrix
Subject: voice dei 516
Date Posted: October 04, 2008 at 3:42 PM
I have an dei 516u voice add on need help its not working?
red connected to alarm red wire 12vt remove the 5 amp fuse
yellow connected to yellow alarm system wire ignition
brown connected to brown alarm system wire siren input
2 gray connected to speaker
green connected to first stage of shock sensor
orange not connected ( i have an orange wire from alarm but its not connected to the car) ground when armed output (-)
yesterday i just connected to orange alarm system wire still no sound from speaker? the man thats installed my alarm didnt use orange wire?
what wire in the car do i need to find for my Orange alarm system ground when armed?
Replies:
Posted By: tall technician
Date Posted: October 04, 2008 at 6:25 PM
what kind of alarm do u have, if it's a dei system, use you ground when armed wire (orange) , if it's already activating a starter kill relay, cut the orange wire and connect two 1 amp diodes, the two cathodes to the orange wire and the other two sides connect to the starter relay and the voice module respectively. P.S ur green wire to the shock sensor isn't necessary if it's a dei system.
-------------
installin's easy. its da customers who make it hard.
Posted By: howie ll
Date Posted: October 04, 2008 at 7:38 PM
Brown should be siren output, from alarm is this a clue? OK TT now i'm going to bed.
|