I have just installed the XR9000 as a replacement to a DEI 800 that failed on me several years ago. I connected the power wires and the ground, but not the ignition wires yet. I am having a problem before I even turn the ignition on. I have a relay hooked to the Channel 3 Dark Blue wire.
Now for the problem: If i press the remote buttons to unlock the car and then use the trunk release button the remote seems to hang for a few mintues. It just will not communicate. A few minutes later, it will work again.
Is there a timeout feature on the remote? Is this an issue with the door/trunk switch, as I do nto have this hooked up at the moment, but it does not seem to have an impact when I ground the brown wire or + the purple wire.
Please give me feedback if anyone knows what is wrong.
Car is a streetrod, so it has a custom electircal system.
Thanks,
joe
-------------
Joseph Jankowski, S.M.
Also, I am having intermitent use of the second remote. I was able to de-arm the system once with this, but for some reason it is not happy at all.
WhenI try to use this remote, the other remote stops working too.
Joe
-------------
Joseph Jankowski, S.M.
It would appear that the issue was because I did not have all the accessories plugged in. Once I plugged in the shock sensor, LED push button, and door lock harness I disconnected and reconnected the power. This appears to have fixed the problem.
Thanks,
joe
-------------
Joseph Jankowski, S.M.