’08 f150 alarm/remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107962
Printed Date: May 04, 2024 at 6:33 PM

Topic: ’08 f150 alarm/remote starter

Posted By: draggindakota
Subject: ’08 f150 alarm/remote starter
Date Posted: October 06, 2008 at 1:15 PM

I'm going to be doing a 2-way alram, remote start on a friends 2008 F-150 very soon and I have some questions. I've been reading through some old posts, and I thing I have most of the info I need.

The system is a Carvox, not sure of the model number at the moment. The truck is a barebones, base model v6. No power anything, not even a tape player (doing a full system also though).

The main thing I'm iffy on is the immobilizer. I've done 6 or 7 remote start systems, but I've never had to do a rs on a vehicle with one yet. Not sure what bypass to get; 555F or 555S or some other bypass?

I may have some other questions once I go through the install manual for the Carvox, but the immobilizer was the main issue. Thanks.

-------------

Replies:

Posted By: ckeeler
Date Posted: October 06, 2008 at 6:13 PM

555F is a little older and probably wont work on your system. use the 555S or even the 555U and you'll be fine. posted_image

Posted By: ckeeler
Date Posted: October 06, 2008 at 6:14 PM

what i mean is, its "older" in that it doesnt work on the newer models of fords.

Posted By: draggindakota
Date Posted: October 07, 2008 at 8:12 AM

What about the XK04? I found some pretty cheap on ebay, or do those only work with DEI units? Thanks for the info.

-------------

Posted By: ckeeler
Date Posted: October 07, 2008 at 8:46 AM

those work just as good as well. they have a few more wires to hook up, but it pretty straight forward. i actually like anything thats made by DEI because of its reliability

Posted By: kgerry
Date Posted: October 07, 2008 at 9:58 AM

XK04 or 556S will work fine..... 555F is 1st Gen PATS and wont work 555S in disco'd and replaced with 556S

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: draggindakota
Date Posted: October 07, 2008 at 11:35 AM

Thanks guys! I just want to make sure I have everything I need. I've got a busy weekend ahead of me: Alarm & RS, Double Din DVD HU, custom enclosure for 2 MB Quart 10's, amp install, full police strobe package.

-------------