03 chevy tahoe
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107974
Printed Date: May 14, 2024 at 4:59 AM
Topic: 03 chevy tahoe
Posted By: douglas.dixon3
Subject: 03 chevy tahoe
Date Posted: October 06, 2008 at 10:56 PM
Is there anyother way to bypass the factory alarm in a 03 chevy tahoe besides going inside the door panel?
-------------
its all about the confidence
Replies:
Posted By: brhaugen
Date Posted: October 07, 2008 at 6:10 AM
Aren't you using an XK01 for doorlocks and passkey?
It should interface with the factory alarm over the data bus.
-------------
Brent Haugen
Fargo, ND
Posted By: kgerry
Date Posted: October 07, 2008 at 9:59 AM
most data modules available for that platform will deal with OEM alarm....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: douglas.dixon3
Date Posted: October 07, 2008 at 9:17 PM
I dont need to im not getting keyless entry i just used the 555l bypass
-------------
its all about the confidence
Posted By: brhaugen
Date Posted: October 08, 2008 at 6:08 AM
Ahhh - now I get you.
Most installers will get a bypass that will do keyless entry - the bypass usally take care of the security at the same time (over the data bus).
The GMDL is an inexpensive bypass that would do both for you.
The only other way to disarm the factory alarm is by using a the green (-) wire at the door lock module inside the drivers door.
-------------
Brent Haugen
Fargo, ND
|