2003 dakota qc lock / unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108055
Printed Date: May 14, 2024 at 4:27 PM

Topic: 2003 dakota qc lock / unlock

Posted By: madmali1
Subject: 2003 dakota qc lock / unlock
Date Posted: October 09, 2008 at 9:40 PM

i am installing a security and r/s unit and am still a little confused about the resistor, relay system for the lock / unlock function is there a diagram or something that goes into more detail. any help would be appreciated.

Replies:

Posted By: brhaugen
Date Posted: October 09, 2008 at 10:38 PM

Look in the Diagrams Section, under Door locks, Use the Dodge Caravan diagram -- the only difference is you do not need a resistor for the lock, only the unlock -- be sure to use the correct value, not the ones in the diagram. If your unit doesn't have a (-) out for doorlocks you need to use relays to make one. If you use relays you do not need the diodes.

-------------
Brent Haugen
Fargo, ND

Posted By: madmali1
Date Posted: October 11, 2008 at 5:36 PM

Thank You much! thts what i needed to know

Print Page | Close Window