python 990 .
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108075
Printed Date: May 04, 2024 at 7:52 AM
Topic: python 990 .
Posted By: toofastgtp
Subject: python 990 .
Date Posted: October 10, 2008 at 4:47 PM
Ok first time poster long time seeker.
Now few years ago i had a python 990 installed at Circuit City.
All was fine until a month ago when the system would no longer do anything.
Sent unit to DEI who replaced with a new unit 990.
Circuit city reinstalled it took 5-10 min.
Issue is with old unit when i used truck release Ch.2 AUX it would show up on remote as trunk now new unit only shows a small 2.
Circuit said they don't know. So i took car home and called dei after reading the book. I did try the program remote thing with hit AUX until trunk shows, and still only shows a small 2.
Called dei and they were no help. All they told me was to take it back to them so they could isolate the problem or try programing the remote. Well they have tried and i have tried and still stuck.
Please can some one help me get this fixed?
Replies:
Posted By: toofastgtp
Date Posted: October 10, 2008 at 4:51 PM
PS sorry.
1998 Buick regal GS
Wanna race a 300+hp gramps car :-p
Le me know if you need more info.
|