scytek 5100 rs in 2003 ford ranger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108106
Printed Date: November 04, 2025 at 2:10 AM
Topic: scytek 5100 rs in 2003 ford ranger
Posted By: t&t tech
Subject: scytek 5100 rs in 2003 ford ranger
Date Posted: October 12, 2008 at 12:06 PM
i'm installin a scytek remote start model 5100-RS, IN A 2003 ford ranger, everything works except the remote start, when i hit the remote start, the parking lights blink seven times and nothing happens, the manual says in the diagnostic section that when the lights blink seven times that the remote start is cancelled but i can't figure why, i've rechecked all my connections and everything is fine, anyone encounter this before
Replies:
Posted By: Chris Luongo
Date Posted: October 12, 2008 at 2:58 PM
1. Test brake input while operating remote start.
2. Test hood input while operating remote start.
3. Test neutral safety input (if you have one) while operating remote start.
Posted By: t&t tech
Date Posted: October 12, 2008 at 5:55 PM
everythin's as it should be, any other suggestions, thanks anyway
-------------
Posted By: brhaugen
Date Posted: October 12, 2008 at 9:37 PM
Did you hook the small gauge ignition wire to the heavy gauge ignition wire?
Did you set it for gas mode and tach monitoring?
Did you successfully learn tach?
I sometimes stumble on these when I haven't installed a Scytek for a while.
-------------
Brent Haugen
Fargo, ND
Posted By: t&t tech
Date Posted: October 13, 2008 at 6:45 PM
did all that and still, it's diesel if u didn't know, programmes it to diesel also and still nunn. any more suggestions
-------------
Posted By: brhaugen
Date Posted: October 14, 2008 at 6:09 AM
We have very few Diesel Rangers here it the US - so I assumed gas.
-------------
Brent Haugen
Fargo, ND
|